What's new in 6.39rc79:
- fastpath - fixed traffic blocking when fasttrack-connection filter rule is enabled (introduced in 6.39rc62);
- fetch - fixed authentication failure;
- fetch - fixed download issue over HTTPS;
- lte - added initial support for DWR-910 modem;
- quickset - added initial LTE AP mode support;
- winbox - fixed typo in BGP advertisements menu Aggragator->Aggregator;
- winbox - removed unnecessary "/system health" menu on "hAP ac lite";
Other changes since 6.38.5:
- bridge - added "fast-forward" setting and counters (enabled by default only for new bridges) (CLI only);
- bridge - added support for special and faster case of fastpath called "fast-forward" (available only on bridges with 2 interfaces);
- bridge - fixed BPDU rx/tx when protocol-mode=none;
- filesystem - fixed rare situation when filesystem failed to read all configuration on startup;
- filesystem - fixed rare situation when filesystem went into read-only mode (some configuration might have gotten lost on reboot);
- firewall - discontinued support for p2p matcher (old rules will become invalid);
- l2tp - added fastpath support when MRRU is enabled;
- ppp - completely rewritten internal fragmentation algorithm (when MRRU is used), optimized for multicore;
- ppp - implemented internal algorithm for "change-mss", no mangle rules necessary;
- pppoe - added fastpath support when MRRU and MLPPP are enabled;
- quickset - configuration changes are now applied only on "OK" and "Apply" (not on mode change);
- tile - fixed IPSec hardware acceleration out-of-order packet problem, significantly improved performance;
- winbox - minimal required version is v3.11;
- address - fixed crash when address is assigned to another bridge port;
- api - fixed double dynamic flags for "/ip firewall address-list print";
- capsman - added "extension-channel" XX and XXXX auto matching modes;
- capsman - added "keepalive-frames" setting;
- capsman - added "skip-dfs-channels" setting;
- capsman - added CAP discovery interface list support;
- capsman - added DFS support;
- capsman - added EAP identity to registration table;
- capsman - added ability to specify multiple channels in frequency field;
- capsman - added save-channel option to speed up frequency selection on CAPsMAN restart;
- capsman - added support for "background-scan" and channel "reselect-interval";
- capsman - added support for static virtual interfaces on CAP;
- capsman - changed channel "width" name to "control-channel-width" and changed default values;
- capsman - improved CAP status querying;
- capsman - improved support for communicating frame priority between CAP and CAPsMAN;
- certificate - SCEP client now supports FQDN URL and port;
- certificate - allow CRL address to be specified as DNS name;
- console - fixed "/ip neighbor discovery" export;
- console - fixed DHCP/PPP add-default-route distance minimal value to 1;
- console - fixed crash;
- console - fixed incorrect ":put [/lcd get enabled]" value;
- ddns - improved "dns-update" authentication validation;
- defconf - fixed Groove 52 ac band settings;
- defconf - fixed default configuration generation when wireless package is disabled;
- dhcp-client - added "script" option which executes script on state changes;
- dhcpv4 - fixed string option parser;
- dhcpv4-server - added "lease-hostname" script parameter;
- dhcpv4-server - by default make server “authoritative”;
- dhcpv4-server - do some lease checks only on enabled object;
- discovery - fixed LLDP discovery, IPv6 address was not parsed correctly;
- email - check for errors during SMTP exchange process;
- ethernet - added "voltage-too-low" status for single port power injector devices;
- ethernet - fixed "loop-protect" on "master-port";
- ethernet - fixed rare switch chip hang (could cause port flapping);
- ethernet - fixed unnecessary power cycle of powered device when changing any poe-out related setting on single port power injector devices;
- ethernet - renamed "rx-lose" to "rx-loss" in ethernet statistics;
- ethernet - reversed poe-priority on hEX PoE and OmniTIK 5 PoE to make "poe-priority" consistent to all other RouterOS priorities;
- fastpath - fixed rare crash on devices with dynamic interfaces;
- fetch - added "http-data" and "http-method" parameters to allow delete, get, post, put methods (content-type=application/x-www-form-urlencoded by default);
- gps - added "fix-quality" and "horizontal-dilution" parameters;
- graphing - fixed graph disappearance after power outage;
- hotspot - added access to HTTP headers using $(http-header-name);
- ike1 - fixed ph2 ID logging;
- ike2 - allow multiple child SA traffic selectors on re-key;
- ike2 - always replace empty TSi with configured address if it is available;
- ike2 - check child state before allowing rekey;
- ike2 - default to /32 peer address mask;
- ike2 - fixed CTR mode;
- ike2 - fixed EAP message length;
- ike2 - fixed ISA handler object removal on SA delete;
- ike2 - fixed RSA authentication without EAP;
- ike2 - fixed ctr mode;
- ike2 - fixed disabled DPD;
- ike2 - fixed last EAP auth payload type;
- ike2 - fixed ph2 state when sending notify;
- ike2 - fixed policy release during SA negotion;
- ike2 - fixed state when sending delete packet;
- ike2 - improved logging;
- ike2 - kill only child SAs which are not re-keyed by remote peer;
- ike2 - log RADIUS timeout message under error topic;
- ike2 - remove old SA after rekey;
- ike2 - send EAP identity as user-name RADIUS attribute;
- ike2 - update "calling_station_id" RADIUS attribute;
- ike2 - update peer identity after successful EAP authentication;
- ippool - return proper error message when trying to create duplicate name;
- ipsec - added "last-seen" parameter to active connection list;
- ipsec - allow mixing aead algorithms in proposal;
- ipsec - better responder flag calculator for console;
- ipsec - disallow AH+ESP combined policies ;
- ipsec - do not loose "use-ipsec=yes" parameter after downgrade;
- ipsec - enable aes-ni on i386 and x64 for cbc, ctr and gcm modes;
- ipsec - fixed "/ip ipsec policy group export verbose";
- ipsec - fixed "mode-cfg" verbose export;
- ipsec - fixed SA authentication flag;
- ipsec - renamed "hw-authenc" flag to "hw-aead";
- ipsec - show hardware accelerated authenticated SAs;
- ipsec - updated tilera classifier for UDP encapsulated ESP;
- l2tp - added support for multiple L2TP tunnels (not to be confused with sessions) between same endpoints (required in some LNS configurations);
- l2tp - fixed hidden attribute decryption in forwarded CHAP responses for LNS;
- l2tp-server - added "caller-id-type" to forward calling station number to RADIUS on authentication;
- l2tp-server - added "use-ipsec=required" option;
- l2tp-server - fixed upgrade to keep "use-ipsec=yes" in L2TP server;
- leds - added LTE modem access technology trigger;
- leds - changed error message on unsupported board;
- leds - do not update single LED state when it is not changed;
- leds - show warning on print when "modem-signal-threshold" is not available;
- log - added "gps" topic;
- log - added "tr069" topic;
- log - added missing "license limit exceeded" log entry;
- log - added warning when Winbox/Dude sessions were denied;
- log - do not show changes in packet if NAT has not been used;
- log - make SNMP logs more compact;
- lte - added "session-uptime" in info command;
- lte - added LTE signal level reading for Cinterion modems;
- lte - added error handling for remote AT execute;
- lte - added initial support for Quectel ec25;
- lte - added initialization for Cinterion;
- lte - added log entry for SMS delivery report;
- lte - added support for Vodafone R216 (Huawei);
- lte - buffer AT events while info command is active;
- lte - fixed "/interface lte info X once";
- lte - fixed IPv6 address prefix on interface
- lte - fixed network mode selection for me909u, mu609;
- lte - fixed older standard CEREG parsing;
- lte - fixed support for Huawai R216;
- lte - fixed user-command;
- lte - reset interface stats on "link-down";
- netinstall - fixed typos;
- ntp - restart NTP client when it is stuck in error state;
- ppp - added "bridge-horizon" option under PPP/Profile;
- ppp - added option to specify "interface-list" in PPP/Profile;
- ppp - fixed rare kernel failure on PPP client connection;
- ppp - fixed rare kernel failure when receiving IPv6 address on PPP interface;
- ppp - include rates, limits and address-lists parameters in RADIUS accounting requests;
- ppp-client - added support for Datacard 750UL, DWR-730 and K4607-Zr;
- pppoe - added warning on PPPoE client/server, if it is configured on slave interface;
- pppoe - added warning on PPPoE client/server, if it is configured on slave interface;
- pppoe - set default keepalive 10s for newly created PPPoE clients;
- rb1100ahx2 - fixed random counter resets for ether12,13;
- rb3011 - added partitioning support;
- smb - fixed different memory leaks and crashes;
- smb - fixed share path on devices with "/flash" directory;
- smips - reduced RouterOS main package size;
- snmp - "No Such Instance" error message is replaced with "No Such Object";
- snmp - added fan-speed OIDs in "/system health print oid";
- snmp - added optical table;
- snmp - fixed rare crash;
- snmp - improved getall filter;
- snmp - improved response speed when multiple requests are received within short period of time;
- snmp - increase “engineBoots” value on reboot;
- snmp - optimized bridge table processing;
- tile - added initial support for NVMe SSD disk drives;
- tile - fixed IPSec crash (introduced in 6.39rc64);
- tile - optimized hardware encryption;
- tr069-client - added "Device.Hosts.Host.{i}." support;
- tr069-client - added "Device.WiFi.NeighboringWiFiDiagnostic." support;
- tr069-client - added "Ethernet.Interface.{i}.MACAddress" parameter;
- tr069-client - added DHCP server support;
- tr069-client - added Upload RPC "2 Vendor Log File" support;
- tr069-client - added architecture name parameter (X_MIKROTIK_ArchName - vendor specific);
- tr069-client - added basic stats parameters for some interface types;
- tr069-client - added basic support for "/ip firewall filters";
- tr069-client - added connection request authentication;
- tr069-client - added firewall NAT support using vendor Parameters;
- tr069-client - added parameters for DNS client management support;
- tr069-client - added ping diagnostics support;
- tr069-client - added support for escaped entity references (& < > ' ");
- tr069-client - added support for managing "/system/identity/" value;
- tr069-client - added support for memory and CPU load parameters;
- tr069-client - added support for uploading/downloading factory script;
- tr069-client - added traceroute diagnostics support;
- tr069-client - close connection if CPE considers XML as invalid;
- tr069-client - fixed "AddObjectResponse" “InstanceNumber” value;
- tr069-client - fixed "Device.ManagementServer." value update;
- tr069-client - fixed XML special character parsing;
- tr069-client - fixed crash on =acs-url change special case;
- tr069-client - fixed special escape characters on XML data send;
- tr069-client - fixed write for "Device.ManagementServer.URL";
- tr069-client - general improvements on reducing storage space;
- tr069-client - generate random connection request target path;
- tr069-client - hide "Device.PPP.Interface.{i}.Password" value;
- tr069-client - improved LTE monitoring process;
- tr069-client - increased performance on GetParameterValues;
- tr069-client - made any Download RPC overwrite configuration except ".alter";
- tr069-client - make more Parameters deny active notifications;
- tr069-client - set CHR license ID as ".SerialNumber" value to avoid "no serial number" error in ACS;
- traceroute - small fix;
- tunnels - fixed reboot loop on configurations with IPIP and EoIP tunnels (introduced in 6.39rc68);
- usb - added support for more CP210X devices;
- userman - allow "name-for-user" to be empty and not unique;
- userman - automatically select all newly created users to generate vouchers;
- userman - fixed rare crash when User Manager requested file does not exist on router;
- userman - fixed rare web interface crash while using Users section;
- wAP ac - improved 2.4GHz wireless performance;
- webfig - added menu bar to quickly select between Webfig, Quickset and Terminal;
- webfig - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- webfig - allow to change global variable contents;
- webfig - allow to enter frequency ranges in wireless scan list;
- webfig - allow to select "default-encryption" profile on PPP tunnels;
- webfig - correctly specify routing filter prefix;
- webfig - do not allow to reorder items if table is sorted by some column;
- webfig - fixed bridge property display;
- webfig - fixed delays on key press in terminal;
- webfig - fixed tab ordering on Google Chrome;
- webfig - fixed “last-link-up” & “last-link-down” time information;
- webfig - improved field layout;
- webfig - make Terminal window work within Webfig window;
- webfig - show all available options under “Advanced Mode” for wireless interfaces;
- webfig - show proper error messages for optional erroneous text fields;
- winbox - added "Flush" button under unicast-fdb menu;
- winbox - added "group-key-update" to CAPsMAN security settings;
- winbox - added "k" and "M" unit support to PPP secret limit-bytes parameters;
- winbox - added "memory-scroll", "filter-cpu", "filter-ipv6-address", "filter-operation-between-entries" parameters;
- winbox - added "save-selected" setting under CAPsMAN channels;
- winbox - added "static-virtual" to wireless CAP;
- winbox - added GPS menu;
- winbox - added protected routerboard parameters under routerboard settings menu;
- winbox - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- winbox - allow to change user password to empty one;
- winbox - allow to not specify certificate in IPSec peer settings;
- winbox - allow to specify "route-distance" in "dhcp-client" if "special-classless" mode is selected;
- winbox - allow to specify certificate type when exporting it;
- winbox - allow to specify interfaces that CAPsMAN can use for management;
- winbox - allow unhide SNMP passwords;
- winbox - allowed to specify static-dns as list;
- winbox - do not allow Packet Sniffer "memory-limit" and "file-limit" lower than 10KiB;
- winbox - do not create time field when copying CAPsMAN access list entry;
- winbox - do not show "dpd-max-failures" on IKEv2;
- winbox - do not show empty LTE fields in Info menu;
- winbox - do not start Traffic Generator automatically when opening "Quick Start";
- winbox - do not try to disable dynamic items from firewall tables;
- winbox - fixed "Montly" typo to "Monthly" in Graphing menu;
- winbox - fixed CAPsMAN channels frequency (allow to specify a list of them);
- winbox - fixed IPSec "mode-config" DNS settings;
- winbox - fixed issue when working IPSec policies were shown as invalid;
- winbox - fixed misleading error when trying to export certificate;
- winbox - hide "wps-mode" & "security-profile" in wireless nv2 mode;
- winbox - hide health menu on RB450;
- winbox - improved "/tool torch";
- winbox - increased maximal number of Winbox sessions 20->100;
- winbox - properly name CAP Interface on new interface creation;
- winbox - properly show "dhcp-server" warnings;
- winbox - properly show IPSec "installed-sa" "enc-algorithm" when it is aes-gcm;
- winbox - properly show wireless registration table stat counters;
- winbox - removed "sfp-rate-select" setting from ethernet interface;
- winbox - set default "dhcp-client" "default-route-distance" value to 1;
- winbox - show "A" flag for IPSec policies;
- winbox - show "H" flag for IPSec installed SAs;
- winbox - show PoE-OUT current, voltage and power only on devices which can report these values;
- wireless - added Egypt 5.8 country settings;
- wireless - added PEAP authentication support for wireless station mode;
- wireless - apply broadcast bit to DHCP requests when using "station-pseudobridge" mode;
- wireless - do not allow equal MAC addresses between multiple Virtual APs when same "master-interface" is used;
- wireless - fixed RBSXT5HacD2nr2 small channel support;
- wireless - fixed crash while running "spectral-scan";
- wireless - fixed dynamic wireless interface removal from bridge ports when changing wireless mode;
- wireless - fixed false positive DFS radar detection caused by iPhone 6s devices;
- wireless - fixed issue when wireless interfaces might not show up in CAP mode;
- wireless - fixed occasional crash on interface disabling;
- wireless - fixed rare crash on nv2 configurations;
- wireless - fixed rare wireless ac interface lockup;
- x86 - added support for NVMe SSD disk drives;
0 التعليقات :
إرسال تعليق